Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the tire pressure sensor on an Infiniti QX60?

Model: Infiniti QX60 L50 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Tire pressure warning light

Video tutorial

To reset the tire pressure light on an Infiniti QX60, turn on the instrument panel without starting the engine. Use the controls on the steering wheel to access the main menu of the system.

Navigate through the various options on the dashboard screen until you find the section dedicated to tire pressure monitoring. Select this option and look for the reset or calibration function.

Confirm the choice following the instructions that appear on the display, allowing the system to record the current pressure values as new reference parameters. Once the operation is completed, the light should turn off, indicating that the process has been successfully completed.

To ensure that everything is set up correctly, turn off and on the instrument panel. If the message no longer appears, it means that the system has been updated and tire pressure monitoring is active again.


Posted on 16 June 2025 by ScegliAuto


Related tutorials

How to Reset the Oil Service on an Infiniti QX60?
How to Reset the Oil Service on an Infiniti QX60?
Infiniti QX60 (2013-2020 / L50) Resetting the oil service on an Infiniti QX60 is a very simple and quick task. Before doing this, ensure you have completed all required scheduled ma…
How to Reset the Maintenance Light on an Infiniti QX60
How to Reset the Maintenance Light on an Infiniti QX60
Infiniti QX60 (2013-2020 / L50) Fortunately, the procedure to manually reset the maintenance light on your Infiniti QX60 is very simple and can be completed in a few seconds by foll…
How to Replace the Cabin Filter on the Infiniti QX60?
How to Replace the Cabin Filter on the Infiniti QX60?
Infiniti QX60 (2013-2020 / L50) To replace the cabin filter on the Infiniti QX60, you need to detach the carpeted panel located in the footwell on the passenger side, on the left si…

Other guides you may be interested in

Where to Find and How to Remove the Spare Wheel of a Peugeot 5008?

The spare wheel of a Peugeot 5008 is located under the rear of the vehicle. To remove it, you need to lift the third row of seats to access the fixing bolt that holds the spare wheel in position. Using the correct spanner, proceed to unscrew the fixing bolt until the wheel is no longer secured. At this point, you can extract the spare wheel from underneath the vehicle. Once you have completed this step, you are free to fit the spare wheel. Ensure you correctly remount the spare wheel and securely tighten the fixing bolt when you are finished.

Watch the video!


by ScegliAuto

More videos