Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Infiniti
    3. :
  3. Q30
    4. : How do you replace the cabin filter on the Infiniti Q30?

Infiniti Q30 - Video tutorial

Model: Infiniti Q30 MK 1 - Years 2015-2019
Part: Cabin air filter
Operation: How do you replace the cabin filter on the Infiniti Q30?

In order to replace the cabin filter of the Infiniti Q30 you have to go and remove the carpet that is located immediately under the glove box on the front passenger side. By removing the carpet it will be possible to identify the passenger compartment filter located inside its housing: the latter can now be extracted from its seat and replaced with a new spare part. After the replacement has taken place, it will be necessary to reposition the carpet in the lower part of the glovebox on the passenger side, checking that everything works correctly.


Posted on 24 July 2022 by ScegliAuto

    Frequently Asked Questions

    • Infiniti Q30 2015-2019 - Where is the cabin filter on the Infiniti Q30 located? Read Answer
    • Infiniti Q30 2015-2019 - Where is the Infiniti Q30 pollen filter located? Read Answer
    • Infiniti Q30 2015-2019 - Where is the cabin filter of an Infiniti q30 located? Read Answer
    • Infiniti Q30 2015-2019 - What is the cabin filter of an Infiniti Q30 for? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos