Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Infiniti
    3. :
  3. Q30
    4. : How to reset the Infinity Q30 TPMS light

Infiniti Q30 - Video tutorial

Model: Infiniti Q30 MK 1 - Years 2015-2019
Part: -board computer
Operation: How to reset the Infinity Q30 TPMS light

If when you start your Infinity Q30 you notice the tire pressure warning light coming on, don't worry because the solution to the problem is very simple. Obviously, first make sure that you have inflated all the tires to the right pressure, then go inside the vehicle and turn on the instrument panel. Press the right arrow, access the on-board computer menu and enter "Services". Select the "Tyre Pressure" option and press "OK". At this point, drive a few kilometers by car to allow the sensor to read the data again.


Posted on 18 November 2022 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos