Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Air Filter in an Infiniti G37

Model: Infiniti G V36 - Years 2007-2015
Part: Cabin air filter

Replacing the cabin air filter in your Infiniti G37 is a maintenance task that requires patience and a bit of dexterity. With the following mini guide, you will be able to complete all the steps without difficulty. First, turn off the car and reach the passenger side. Next, open the glove compartment and remove both the upper panel and the side plastic panel. Once done, detach the glove compartment and remove it completely. At this point, locate the cabin filter box at the rear, open the cover, and proceed with the replacement.

Updated on 20 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Air Filter in the Infiniti G G37?
How to Replace the Air Filter in the Infiniti G G37?
Infiniti G (2007-2015 / V36) In this tutorial, you will learn how to replace the air filter in the Infiniti G G37, a very simple and quick operation. Start by opening the bonnet,…
How to Replace the Cabin Filter on the Infiniti G37?
How to Replace the Cabin Filter on the Infiniti G37?
Infiniti G (2007-2015 / V36) This tutorial shows how to replace the cabin filter on the Infiniti G37, a very simple and quick operation. Start by sitting in the passenger seat, t…
How to Reset the Service Light on an Infiniti G37
How to Reset the Service Light on an Infiniti G37
Infiniti G (2007-2015 / V36) This video shows the steps to reset the service light on an Infiniti G37. First, get in the vehicle and press the start/stop button once to turn on t…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos