Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the AdBlue Warning Light in the Isuzu Dmax?

Model: Isuzu Isuzu D Max Rt85, Rt50 - Years 2011-2024
Part: AdBlue warning light

The vehicle in question is the same as that shown in the attached video guide, which also explains where the cap for the tank of the mentioned anti-pollution additive, AdBlue, is located, to be topped up when low. Fortunately for us, both the topping up and the reset of the warning light are operations that do not require the intervention of specialised personnel, as topping up is straightforward, while the cancellation of the alarm occurs automatically; the vehicle's ECU will detect the new level of the product and turn off the light.

Posted on 19 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the 4WD Light on an Isuzu D-Max?
How to Reset the 4WD Light on an Isuzu D-Max?
Isuzu Isuzu D Max (2011-2024 / Rt85, Rt50) The light identified with the 4WD symbol refers to the four-wheel drive function of the vehicle in question, the Isuzu D-Max. If this system malfunct…
Reset 4WD warning light on Isuzu Dmax.
Reset 4WD warning light on Isuzu Dmax.
Isuzu Isuzu D Max (2011-2024 / Rt85, Rt50) Today we are shown, through this very short tutorial, how to reset the "CHECK 4WD" light on an Isuzu Dmax, model produced from the year 2011 onwards.…
How to Replace the Standard Radio in an Isuzu Dmax
How to Replace the Standard Radio in an Isuzu Dmax
Isuzu Isuzu D Max (2011-2024 / Rt85, Rt50) Today, we will see in this video tutorial how to remove and replace the standard radio in an Isuzu Dmax, following the instructions below. First, get…

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos