How to check the AdBlue level in the Isuzu D-Max

To check the AdBlue level in the Isuzu D-Max, you can follow these steps: ### 1. **Turn on the instrument panel**: - Turn the key to the "ON" position without starting the engine (or press the ignition button without pressing the brake pedal, if your D-Max has keyless ignition). ### 2. **Access the dashboard menu**: - Use the control buttons on the steering wheel or windshield wiper lever (depending on the model) to navigate the dashboard display menu. ### 3. **Select the "Vehicle Information" section**: - Look for the "Vehicle Information" or "Info vehicle" option.

Within this menu, you should find the option to view the AdBlue level. ### 4. **Check the AdBlue level**: - The display will show you the AdBlue level.

It may be indicated as a percentage, a fill bar, or a message informing you of the remaining quantity. ### 5. **AdBlue warning monitoring**: - If the AdBlue level is low, a warning light or message will appear on the dashboard. Typically, the Isuzu D-Max will give you enough warning in advance, allowing you time to refill the AdBlue before the system limits engine performance. ### 6. **Refilling AdBlue**: - If the level is low, refill the AdBlue using the dedicated tank, which is usually located near the fuel cap or in the engine compartment.

Always use high-quality AdBlue to avoid issues with the SCR (Selective Catalytic Reduction) system. ### 7. **Final check**: - After refilling, turn on the instrument panel again to ensure that the level has been updated correctly on the display and that any warning lights have turned off. By following these steps, you should be able to properly monitor and manage the AdBlue level in your Isuzu D-Max.