Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Isuzu
  4. :
  5. Isuzu D Max
  6. : How to reset the malfunctioning 4wd system light on the Isuzu Dmax.

Isuzu Isuzu D Max - Video tutorial

Model: Isuzu Isuzu D Max Rt85, Rt50 - Years 2011-2023
Part: Instrument cluster
Operation: How to reset the malfunctioning 4wd system light on the Isuzu Dmax.

If we have noticed that the warning light for the inability to use the four-wheel drive on our car's dashboard has turned on, in the following description we have provided the necessary information and procedures to reset and verify the system's functioning. With the dashboard turned off, press and hold down the three buttons on the central console marked with 2H, 4H, and 4L, then turn on the dashboard and continue to hold down the three buttons for at least 30 seconds until the warning light on the dashboard turns off.


Posted on 28 May 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos