Do it yourself
Frequently asked questions about cars and motorcycles

Reset 4WD warning light on Isuzu Dmax.

Model: Isuzu Isuzu D Max Rt85, Rt50 - Years 2011-2024
Part: Warning light – error code

Today we are shown, through this very short tutorial, how to reset the "CHECK 4WD" light on an Isuzu Dmax, model produced from the year 2011 onwards. We start the procedure by turning on the car's instrument panel without starting the engine, then we press and hold down three buttons simultaneously, namely "2H", "4H" and "4L". Once this is done, we will see that the red check light will disappear and a green light will start flashing as shown in the video, so we continue to hold down the three buttons until the green light disappears to complete and finish the reset.

Posted on 9 June 2024 by ScegliAuto

Video tutorial

Related tutorials

Isuzu Isuzu D Max (2011-2024 / Rt85, Rt50) If you notice that the warning light for the inability to use four-wheel drive has illuminated on your vehicle's instrument cluster, the following de…
Isuzu Isuzu D Max (2011-2024 / Rt85, Rt50) The light identified with the 4WD symbol refers to the four-wheel drive function of the vehicle in question, the Isuzu D-Max. If this system malfunct…
Isuzu Isuzu D Max (2011-2024 / Rt85, Rt50) If the "Check 4WD" light has illuminated in your Isuzu D-Max pickup, it indicates a malfunction in the all-wheel-drive management system. The problem…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos