Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Air Filter in the Isuzu MU-X?

Model: Isuzu Mu X MK  1, RF - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Cabin air filter

See other generations:
Video tutorial

As we can see in this tutorial, replacing the cabin air filter in the Isuzu MU-X is a very simple and quick operation. The first step, since it is located behind the glove compartment on the passenger side, is to remove the drawer and its frame.

To do this, open it and unclip the two side pins, then unscrew the 5 indicated screws and remove the frame. At this point, if there is no access door in the housing, cut the panel along the perimeter and pull out the filter.

Finally, install the new filter by following the reverse procedure and cover the housing with the door, which must be purchased separately.


Updated on 18 May 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Filter on an Isuzu MU-X?
How to Replace the Cabin Filter on an Isuzu MU-X?
Isuzu Mu X (2020-2026 / MK 2) To replace the cabin filter on an Isuzu MU-X, open the glove compartment located on the passenger side. To fully remove the glove compartment and acc…
How to Replace the Cabin Filter of the Isuzu MU-X?
How to Replace the Cabin Filter of the Isuzu MU-X?
Isuzu Mu X (2020-2026 / MK 2) To replace the cabin filter of the Isuzu MU-X, open the glove compartment located on the passenger side: this will allow you to loosen the screws tha…
How to Replace the Cabin Air Filter in an Isuzu MU-X?
How to Replace the Cabin Air Filter in an Isuzu MU-X?
Isuzu Mu X (2013-2020 / MK  1, RF) As we can see in this tutorial, replacing the cabin air filter in an Isuzu MU-X is a very simple and quick operation. First, you need to remove the g…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos