Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting Maintenance on Isuzu MU-X

Model: Isuzu Mu X MK  1, RF - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Warning light – error code

See other generations:
Video tutorial

Learn how to reset the maintenance on an Isuzu MU-X vehicle, produced from 2016 to 2021. Start the operation by turning on the instrument cluster without starting the engine. Next, press the end button on the right lever until you reach the "select mode" screen on the information display of the speedometer.

Then, press and hold the end button on the left lever to enter. After that, using the two previous end buttons, select the "service" option followed by the "engine oil" and "maintenance" options, setting a new interval for these last two options.


Updated on 26 September 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on the Isuzu MU-X
How to Reset the Service Light on the Isuzu MU-X
Isuzu Mu X (2013-2020 / MK  1, RF) As you can see in this tutorial, resetting the service light on the Isuzu MU-X is an extremely simple and quick operation. Before proceeding, make su…
How to Replace the Air Filter on an Isuzu MU-X?
How to Replace the Air Filter on an Isuzu MU-X?
Isuzu Mu X (2013-2020 / MK  1, RF) To replace the air filter on an Isuzu MU-X, open the hood to access the components inside the engine compartment. On the left side, you will find the…
How to Reset the Maintenance Light on Your Isuzu Mu X
How to Reset the Maintenance Light on Your Isuzu Mu X
Isuzu Mu X (2020-2026 / MK 2) In this guide, you will learn a very simple and effective method to reset the maintenance light on your Isuzu Mu X without using any diagnostic tools…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos