Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Perform Maintenance on the Isuzu Mu X

Model: Isuzu Mu X MK  1, RF - Years 2013-2020
Part: Engine oil

Today, discover the necessary instructions to perform routine maintenance on the Isuzu Mu X by replacing the engine oil and oil filter. First, lift the vehicle and start unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then use the appropriate wrench to unscrew and remove the oil filter, replacing the cartridge with a new one and inserting the new gasket, as shown in the video. Finally, unscrew the oil fill cap and top off the oil!

Updated on 19 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Maintenance Light on Your Isuzu Mu X
How to Reset the Maintenance Light on Your Isuzu Mu X
Isuzu Mu X (2020-2026 / MK 2) In this guide, you will learn a very simple and effective method to reset the maintenance light on your Isuzu Mu X without using any diagnostic tools…
Maintenance of the Rear Air Conditioning Fan on Isuzu MUX
Maintenance of the Rear Air Conditioning Fan on Isuzu MUX
Isuzu Mu X (2020-2026 / MK 2) As shown in the video, to perform maintenance on the rear air conditioning fan of the Isuzu MU X, you will need to remove the rear panel until the fa…
Resetting maintenance on Isuzu MU-X
Resetting maintenance on Isuzu MU-X
Isuzu Mu X (2013-2020 / MK  1, RF) Let's see how to reset the maintenance on an Isuzu MU-X vehicle, model produced from 2016 to 2021. Let's start the operation by turning on the vehicl…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos