Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Maintenance of the Rear Air Conditioning Fan on Isuzu MUX

Model: Isuzu Mu X MK 2 - Years: 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Air conditioner

See other generations:
Video tutorial

As shown in the video, to perform maintenance on the rear air conditioning fan of the Isuzu MU X, you will need to remove the rear panel until the fan is visible. Set aside the screws you remove.

To take off the fan cover, unscrew the three screws, disconnect the connectors, and remove the plastic tube. For good maintenance, clean the fan. Next, also remove the lower cover by taking out all the screws to access the evaporator.

To keep it clean, you can cover the evaporator with a thin protective filter to prevent dust from clogging it. Your maintenance is complete. Reconnect and re-screw all connectors and screws.


Updated on 29 July 2026 by ScegliAuto


Related tutorials

How do you turn on the air conditioning in the Isuzu Mux?
How do you turn on the air conditioning in the Isuzu Mux?
Isuzu Mu X (2020-2026 / MK 2) In this 2023 Isuzu Mux video presentation, we can see in detail all the details of the vehicle, both inside and outside, controls, functions, etc. In…
How to Change the Key Battery on the Isuzu MUX
How to Change the Key Battery on the Isuzu MUX
Isuzu Mu X (2020-2026 / MK 2) If you intend to replace the remote key battery on this vehicle model, the following text provides instructions on how to proceed and execute the tas…
How to Replace the Cabin Air Filter on an Isuzu Mu X
How to Replace the Cabin Air Filter on an Isuzu Mu X
Isuzu Mu X (2013-2020 / MK  1, RF) In this video, you will learn how to replace the cabin air filter on an Isuzu Mu X. First, have a flathead screwdriver, an Allen wrench, and a small …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos