Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the OBD port of the 2018 Iveco Daily located?

Model: IVECO Daily MK 4 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Checks and maintenance

See other generations:
Video tutorial

When the control unit of your Iveco Daily Mk4 (year 2018) detects errors, it is advisable to analyze them thoroughly using a diagnostic tool. This tool should be connected to the appropriate OBD port, and we will explain how to easily locate it. First, enter the cabin and ensure that the vehicle is completely off. Then, focus your attention on the lower area of the dashboard, specifically near the clutch pedal.

At this point, all you need to do is locate the OBD port you were looking for, and the procedure is complete.


Posted on 26 November 2025 by ScegliAuto


Related tutorials

Where is the OBD Port on the 1999 Iveco Daily?
Where is the OBD Port on the 1999 Iveco Daily?
IVECO Daily (1999-2006 / MK 3) In this new guide for those who own a third generation Iveco Daily (1999), we will explain the steps you need to take to access the OBD port of the v…
Where is the OBD port on the Iveco Daily?
Where is the OBD port on the Iveco Daily?
IVECO Daily (2014-2026 / MK 5) The OBD port of the 2014 Iveco Daily van is located behind the protective panel at the bottom of the passenger side dashboard. This connection port a…
Where is the OBD port located on the Iveco Daily 2020?
Where is the OBD port located on the Iveco Daily 2020?
IVECO Daily (2014-2026 / MK 5) To locate the OBD port inside your 2020 Iveco Daily vehicle, simply follow the steps described in the following guide. First, make sure the vehicle i…

Other guides you may be interested in

How to Extract the Spare Wheel from a Mercedes Vito

The spare wheel of a Mercedes Vito is located underneath the vehicle, just below the rear boot. This video demonstrates how to extract the wheel from its compartment. First, open the boot and locate the tools provided with the vehicle to release the wheel; these can be found in a compartment on the right side of the boot. As shown in the video, use the supplied screwdriver to remove the cover cap from the hole where you will insert the socket spanner; this hole is located beneath the rubber seal above the rear bumper. Insert the spanner and attach the extension to allow you to turn it and lower the wheel from under the floor. Finally, detach the pin that allowed the wheel to lower and proceed to extract it from under the vehicle.

Watch the video!


by ScegliAuto

More videos