Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. IVECO
    3. :
  3. Daily
    4. : How to reset the oil change service on the Iveco Daily?

IVECO Daily - Video tutorial

Model: IVECO Daily MK 4 - Years 2006-2020
Part: -board computer
Operation: How to reset the oil change service on the Iveco Daily?

After having changed the oil, filter, air filter and cabin filter, it is necessary to delete the service warning light that appears on the instrument panel, to do this, first turn the key and switch on the ignition, fully depress the accelerator and keep it pressed, while with the other foot fully depress the brake pedal seven times consecutively. After that, release the brake pedal but keep pressing the accelerator pedal for at least one minute. Then turn off the ignition and release the accelerator pedal and wait for at least one more minute with the ignition off. After one minute, turn the ignition back on and the service light will be cleared.


Posted on 6 May 2024 by ScegliAuto



How to reset the Iveco Daily service light
IVECO Daily Today, let's find out how to reset the Iveco Daily oil change routine maintenance warning light by following the instructions below. First of all, we
How to reset the service light on the Iveco Daily.
IVECO Daily After performing the oil change as required by the regular maintenance plan for the Iveco Daily, we will see how to reset the Service light that appe
How to reset the oil service in the Iveco Daily van?
IVECO Daily (2014-2023 / MK 5) In this tutorial we can see how to reset the oil service in the Iveco Daily van, a very simple and fast operation. Before doing this, of course, we w

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos