Do it yourself
Frequently asked questions about cars and motorcycles

How to reset the service on the Iveco Daily

Model: IVECO Daily MK 4 - Years 2006-2020
Part: Warning Light - Car Error Code

If we have replaced the oil and the related filter on this vehicle we must also reset the service warning light which came on on the dashboard, to do this we must follow the procedure below and also help us with the images of the video. The first thing to do is access the passenger compartment and sit in the driver's seat, turn on the ignition and do not turn on the engine, press and hold the accelerator pedal all the way down, then press the pedal 7 times in sequence of the brake. Continue to hold the accelerator pedal down for at least 60 seconds and then switch off the ignition. Keep the accelerator pedal pressed again for another 60 seconds, then release the pedal and turn the ignition back on and the service warning light will have gone out.


Posted on 13 September 2024 by ScegliAuto



To reset the service light on the Iveco Daily.
IVECO Daily (2014-2023 / MK 5) To reset the service light on the Iveco Daily, you can follow these steps: Turn on the Iveco Daily and make sure the service light is displayed on th
How to reset the Iveco Daily service light
IVECO Daily Today, let's find out how to reset the Iveco Daily oil change routine maintenance warning light by following the instructions below. First of all, we
How to reset the service light on the Iveco Daily
IVECO Daily (2014-2023 / MK 5) After performing the oil change, it is necessary to reset the service light; let's see how to reset it on the Iveco Daily. First, we get on board the

Other guides that may interest you

How to deactivate the safe lock on a Volkswagen Golf.

The safe lock is indeed an anti-theft system that prevents thieves from accessing the car. This device locks the doors, both externally and internally, when the driver activates the central locking remote control after leaving the vehicle. To permanently disable it, it is necessary to use a diagnostic program such as VCDS that we will connect to the vehicle through the ODBII port. Then wait for the connection and recognition of the control unit and then select the blocks present and locate the safe lock to disable it. And the job will be completed.

Watch the video!


by ScegliAuto

More videos