Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to install a swivel seat on an Iveco Daily camper

Model: IVECO Daily MK 4 - Years 2006-2020
Part: Seat

In this video, it is shown how to take a standard seat from a Ford Galaxy, and with a small modification turn it into a swivel seat for our Iveco Daily camper. In fact, the Galaxy seat rotates a quarter turn and with the modification it can rotate completely. We remove the base of the seat and there is a flap on the backrest that stops it, so when the seat rotates backwards it gets stuck in the trunk. So by removing that block, we can allow the seat to rotate completely. We can easily remove it with a grinder, and effectively the seat then rotates 180°; we can mount it on our Daily.

Posted on 29 March 2024 by ScegliAuto

Video tutorial

Related tutorials

Mounting the external rearview mirror on Iveco Daily Camper
Mounting the external rearview mirror on Iveco Daily Camper
IVECO Daily (2006-2020 / MK 4) Let's see in this short video how to install the exterior rearview mirror on an Iveco Daily Camper, following these simple steps. First of all let's …
How to replace the front turn signals in the Iveco Daily camper?
How to replace the front turn signals in the Iveco Daily camper?
IVECO Daily (1999-2006 / MK 3) In this tutorial we can see how to replace the front turn signals in the Iveco Daily camper, an extremely simple and quick operation. First of all, m…
How to remove the seat of Iveco Daily 2008
How to remove the seat of Iveco Daily 2008
IVECO Daily (2006-2020 / MK 4) In this video we can see how the seat of this vehicle is replaced, which is in poor condition and therefore needs to be replaced to ensure greater co…

How to Remove the Front Headlamp of a Renault Clio

Remove the front headlamp of a Renault Clio. Open the bonnet by pulling the release lever and secure it; using a battery-powered screwdriver or a screwdriver, undo the securing bolts located at the top of the bumper. Once the screws at the top are undone, remove the splash guard bolts and finally remove the bolts at the bottom of the bumper. Carefully detach the bumper from the body of the vehicle. At this point, disconnect the headlamps from the body (undo the securing bolts) and the bulb holder from the headlamp. Fit the new headlamp with new bulbs if damaged (always ensure the correct type and size) and insert the headlamp into its housing. Finally, refit the front bumper and tighten the bolts.

Watch the video!


by ScegliAuto

More videos