Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the onboard computer screen of the Jeep Compass

Model: Jeep Compass 552, MK 2 - Years 2016-2025
Part: Onboard computer

Today we will explain how to replace the on-board computer screen of the Jeep Compass. To replace the screen, we should first remove the protective cover around it using a plastic tool to pry. After removing the cover, unscrew the four screws that secure the screen using a Phillips screwdriver. Disconnect the connectors and proceed to disassemble the screen. Unscrew the screws on the back of the computer to separate the screen part from the microchip part, being careful not to damage the wires. Remove the screen and proceed to assemble the new one by following the steps in reverse.

Posted on 11 October 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Oil Change Light on a Jeep Compass
How to Reset the Oil Change Light on a Jeep Compass
Jeep Compass (2016-2025 / 552, MK 2) Before you can start, sit in the driver's seat of your Jeep Compass. Begin by activating the instrument cluster without starting the engine by pressi…
How to Replace the Front Headlight Bulb of a Jeep Compass
How to Replace the Front Headlight Bulb of a Jeep Compass
Jeep Compass (2006-2016 / MK 1, MK 49) Before you begin, open the front bonnet of your Jeep Compass. Start by disconnecting the electrical connector attached to the blown bulb, using a fla…
Where to Find and How to Access the Cigarette Lighter Fuse on a Jeep Compass?
Where to Find and How to Access the Cigarette Lighter Fuse on a Jeep Compass?
Jeep Compass (2006-2016 / MK 1, MK 49) The cigarette lighter fuse on your Jeep Compass is located inside the fuse box. The fuse box is situated within the engine bay, near the battery. To …

    Frequently Asked Questions

    • Compass 2016-2025 - Why doesn't the Start&Stop of the Jeep Compass 2 work? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos