Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Jeep
    3. :
  3. Compass
    4. : How to replace the display in a Jeep Compass?

Jeep Compass - Video tutorial

Model: Jeep Compass 552, MK 2 - Years 2016-2024
Part: -board computer
Operation: How to replace the display in a Jeep Compass?

As we can see in this tutorial, replacing the onboard computer display of the Jeep Compass is an extremely simple and fast operation. Before proceeding, make sure the key is not inserted. We begin by dislodging the frame of the display, which also houses the ventilation grilles, with a plastic spatula. Then, we unscrew the 4 fixing screws of the module located at the four corners of the same. Once this is done, we extract the block from the dashboard, disconnect all the rear connectors, and install the replacement by following the exact reverse procedure.


Posted on 3 April 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Compass 2016-2025 - Why is the touch display of the Jeep Compass 2 not working? Read Answer
    • Compass 2016-2025 - Why is the central display of the Jeep Compass not turning on? Read Answer
    • Compass 2016-2025 - What to do if the Jeep Compass Start&Stop doesn't work? Read Answer
    • Compass 2016-2025 - Why doesn't the Jeep Compass Uconnect system work? Read Answer
    • Compass 2016-2025 - Why doesn't the Start&Stop of the Jeep Compass 2 work? Read Answer
    • Compass 2016-2025 - What does the warning light mean to change the engine oil in the Jeep Compass? Read Answer
    • Compass 2016-2025 - What does the oil warning light mean in the Jeep Compass? Read Answer

How to open the bonnet of the Volkswagen Polo

Let's see in this short and simple guide the instructions that will allow us to open the bonnet of the Volkswagen Polo. First of all we open the front door, on the driver's side, and start pulling the opening lever of the engine hood, in order to open the lock; then let's move to the front of the vehicle and unhook the tab that we find on the central part, above the manufacturer's emblem, as shown in the video. At this point we block the bonnet with the lateral rod; then we accompany the bonnet down to close it again!

Watch the video!


by ScegliAuto

More videos