Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the display in the Jeep Compass?

Model: Jeep Compass 552, MK 2 - Years 2016-2025
Part: Onboard computer

In this tutorial we can see how to replace the display in the Jeep Compass, a very simple and quick operation. First of all, make sure that the key is not inserted, then, using a preferably plastic spatula in order to leave no marks, unclip the frame of the display itself. Then unscrew the four fixing bolts using a Torx key, grip the entire module and extract it from the housing. At this point, all that remains is to disconnect the internal connectors, connect the replacement and mount it following the reverse procedure.

Posted on 11 July 2024 by ScegliAuto

Video tutorial

Related tutorials

How to replace the display in a Jeep Compass?
How to replace the display in a Jeep Compass?
Jeep Compass (2006-2016 / MK 1, MK 49) In this tutorial, you will see how to replace the main display in a Jeep Compass, a very simple and quick operation. First, ensure that the key is no…
How to Adjust the Brightness of the Display on the Jeep Compass?
Jeep Compass (2016-2025 / 552, MK 2) In this tutorial, you can see how to adjust the brightness of the main display on the Jeep Compass, a very simple and quick operation to adapt it to …
How to Replace the Display on a Jeep Compass?
How to Replace the Display on a Jeep Compass?
Jeep Compass (2016-2025 / 552, MK 2) As you can see in this tutorial, replacing the display of the onboard computer on a Jeep Compass is an extremely simple and quick operation. Before p…

    Frequently Asked Questions

    • Compass 2016-2025 - Why doesn't the Start&Stop of the Jeep Compass 2 work? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos