Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Adjust the Brightness of the Display on the Jeep Compass?

Model: Jeep Compass 552, MK 2 - Years 2016-2025
Part: Checks and maintenance

In this tutorial, you can see how to adjust the brightness of the main display on the Jeep Compass, a very simple and quick operation to adapt it to your needs. First, insert the key and start the vehicle, then go to the general settings and enter the "Display" section. Next, activate the "Manual" function related to the display configuration mode and adjust the brightness using the "-" and "+" buttons. Once finished, simply return to the home screen to save the setting.

Updated on 8 August 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to adjust the brightness of the instrument panel of the Jeep Compass 2
How to adjust the brightness of the instrument panel of the Jeep Compass 2
Jeep Compass (2016-2025 / 552, MK 2) If you want to manually adjust the brightness level of the instrument panel of your second-generation Jeep Compass, all you have to do is follow the …
How to solve the lighting problems of the Jeep Compass instrument panel
How to solve the lighting problems of the Jeep Compass instrument panel
Jeep Compass (2016-2025 / 552, MK 2) In the Jeep Compass produced from 2021 onwards, the instrument panel lighting is too low, especially in daylight conditions, and the brightness senso…
How to Set the Time in the Jeep Compass?
How to Set the Time in the Jeep Compass?
Jeep Compass (2016-2025 / 552, MK 2) In this tutorial, see how to set the time in the Jeep Compass, a very simple and quick operation to perform, for example, after disconnecting the bat…

    Frequently Asked Questions

    • Compass 2006-2016 - What does "SDW not working" mean on the Jeep Compass? Read answer

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos