Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to adjust the brightness of the instrument panel of the Jeep Compass 2

Model: Jeep Compass 552, MK 2 - Years 2016-2025
Part: Instrument cluster

If you want to manually adjust the brightness level of the instrument panel of your second-generation Jeep Compass, all you have to do is follow the steps described in the following guide. First of all, get into the car and reach the driver's seat, then insert the key and start the instrument panel. At this point, shift your attention to the left side of the dashboard and locate the dial that allows you to adjust the brightness of the panel. Finally, rotate the dial downwards to decrease the brightness level or upwards to increase it.

Posted on 26 March 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Adjust the Brightness of the Display on the Jeep Compass?
Jeep Compass (2016-2025 / 552, MK 2) In this tutorial, you can see how to adjust the brightness of the main display on the Jeep Compass, a very simple and quick operation to adapt it to …
How to solve the lighting problems of the Jeep Compass instrument panel
How to solve the lighting problems of the Jeep Compass instrument panel
Jeep Compass (2016-2025 / 552, MK 2) In the Jeep Compass produced from 2021 onwards, the instrument panel lighting is too low, especially in daylight conditions, and the brightness senso…
How to set the time on the Jeep Compass
How to set the time on the Jeep Compass
Jeep Compass (2016-2025 / 552, MK 2) Setting the time on the Jeep Compass is a very simple operation, which you can do independently with the help of this short video tutorial that will …

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos