Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the display in a Jeep Compass?

Model: Jeep Compass MK 1, MK 49 - Years 2006-2016
Part: Checks and maintenance

In this tutorial, you will see how to replace the main display in a Jeep Compass, a very simple and quick operation. First, ensure that the key is not inserted, then using a plastic spatula to avoid leaving marks, pry off the frame containing the air vents by leveraging along the perimeter. Next, unscrew the four screws securing the multimedia system, grasp it, and pull it out from the support. At this point, you can proceed with repairing the display or installing the complete replacement.

Updated on 27 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the display in the Jeep Compass?
How to replace the display in the Jeep Compass?
Jeep Compass (2016-2025 / 552, MK 2) In this tutorial we can see how to replace the display in the Jeep Compass, a very simple and quick operation. First of all, make sure that the key i…
How do you reset the on-board computer of the Jeep Compass?
How do you reset the on-board computer of the Jeep Compass?
Jeep Compass (2016-2025 / 552, MK 2) In order to reset the onboard computer on the Jeep Compass, you need to turn on the instrument panel by inserting the ignition key into its correspon…
How to replace the onboard computer screen of the Jeep Compass
How to replace the onboard computer screen of the Jeep Compass
Jeep Compass (2016-2025 / 552, MK 2) Today we will explain how to replace the on-board computer screen of the Jeep Compass. To replace the screen, we should first remove the protective c…

Other guides you may be interested in

    Frequently Asked Questions

    • Compass 2006-2016 - What does "SDW not working" mean on the Jeep Compass? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos