Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Car Radio on Jeep Compass

Model: Jeep Compass 552, MK 2 - Years 2016-2025
Part: Car stereo

Removing and replacing the car radio on a Jeep Compass is really simple, and now we will show you how. Get a trim removal tool or a plastic wedge and pry in the gap around the dashboard, pulling out the frame (which has the air vents) from its housing. This way, you can now unscrew the four screws that secure the aforementioned screen. Voilà ! At this point, you can already pull out the dashboard and disconnect the rear cables. As you can see, this is truly a very straightforward operation, accessible even to less experienced mechanics. Reverse the process to install the new dashboard.

Updated on 26 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Radio in the Jeep Compass?
How to Replace the Radio in the Jeep Compass?
Jeep Compass (2006-2016 / MK 1, MK 49) To replace the radio in the Jeep Compass, use a tool to pry off the plastic cover surrounding the radio and climate control. Once the cover is remove…
How to Connect an iPhone to the Jeep Compass Radio
How to Connect an iPhone to the Jeep Compass Radio
Jeep Compass (2016-2025 / 552, MK 2) If you want to listen to your favourite music directly on the radio of the new Jeep Compass, you must connect your smartphone via Bluetooth technolog…
How to disassemble the radio of the Jeep Compass 2
How to disassemble the radio of the Jeep Compass 2
Jeep Compass (2016-2025 / 552, MK 2) If the factory car radio in the interior of your second series Jeep Compass has suddenly stopped working and you want to find out how to safely and q…

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos