Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the key battery in a Jeep Compass?

Model: Jeep Compass 552, MK 2 - Years 2016-2025
Part: Key

The YouTuber in this video shows how to change the battery in the key of his 2019 Jeep Compass, starting from the purchase phase to the final replacement. The video is a bit long, so for convenience, we describe the various phases here. First, obtain a new button battery with the code CR2032, then take the remote for your Jeep Compass and extract the mechanical key. At this point, using a flathead screwdriver, separate the two parts of the remote casing. Now you can see the battery, remove it, and replace it with the new one.

Updated on 30 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Remote Battery of the Jeep Compass?
How to Replace the Remote Battery of the Jeep Compass?
Jeep Compass (2016-2025 / 552, MK 2) To replace the remote battery of the Jeep Compass, move the switch on the back of the remote to slide out the key and the chrome cover on the top of …
How to Replace the Remote Battery on a Jeep Compass
How to Replace the Remote Battery on a Jeep Compass
Jeep Compass (2016-2025 / 552, MK 2) To replace the remote battery on a Jeep Compass, activate the switch located on the back of the device so that the key and its cover can be extracted…
How to Replace the Key Fob Battery on a Jeep Compass?
How to Replace the Key Fob Battery on a Jeep Compass?
Jeep Compass (2006-2016 / MK 1, MK 49) To replace the key fob battery on a Jeep Compass, loosen the screw located just below the key. By loosening this screw, you can open the fob and acce…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos