Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the battery in the Jeep Compass key

Model: Jeep Compass MK 49, MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Key

See other generations:
This video is currently unavailable

Let's see how to change the battery in a Jeep Compass key. First, press the metal button on the outer edge, where the logo is, to release the physical key. Using this key, lever it open to split the remote control casing. On one side, you will find the button cell battery.

Use a small screwdriver or a paperclip to pry it out of its housing. It is a common CR 2032 battery, which you can find for a few pounds at any newsagent or supermarket.

Place the new battery in its slot (ensuring the polarity is correct), close the remote control, and reinsert the physical key. Job done.


Updated on 8 July 2026 by ScegliAuto


Related tutorials

How to replace the key battery in a Jeep Compass?
How to replace the key battery in a Jeep Compass?
Jeep Compass (2016-2025 / 552, MK 2) The YouTuber in this video shows how to change the battery in the key of his 2019 Jeep Compass, starting from the purchase phase to the final replace…
How to Replace the Key Fob Battery on the Jeep Compass
How to Replace the Key Fob Battery on the Jeep Compass
Jeep Compass (2016-2025 / 552, MK 2) In this video tutorial, you can see how easy it is to replace the battery in the key fob for the Jeep Compass. Note: if the Jeep remote is not workin…
How to Replace the Key Battery on a Jeep Compass
How to Replace the Key Battery on a Jeep Compass
Jeep Compass (2016-2025 / 552, MK 2) Before you begin, extract the physical key from the electronic key of your Jeep Compass by pressing the release button and pulling it out. Then, use …

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos