Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Key Battery on a Jeep Compass

Model: Jeep Compass 552, MK 2 - Years 2016-2025
Part: Key

Before you begin, extract the physical key from the electronic key of your Jeep Compass by pressing the release button and pulling it out. Then, use the physical key to pry off the key cover. This will give you access to the exhausted key battery. Proceed to unclip and remove the battery, successfully completing the disassembly. To install the new battery and close the key, simply reverse these steps, and you will have completed the replacement.

Updated on 7 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the key battery in a Jeep Compass?
How to replace the key battery in a Jeep Compass?
Jeep Compass (2016-2025 / 552, MK 2) The YouTuber in this video shows how to change the battery in the key of his 2019 Jeep Compass, starting from the purchase phase to the final replace…
How to Replace the Key Fob Battery on the Jeep Compass
How to Replace the Key Fob Battery on the Jeep Compass
Jeep Compass (2016-2025 / 552, MK 2) In this video tutorial, you can see how easy it is to replace the battery in the key fob for the Jeep Compass. Note: if the Jeep remote is not workin…
How to Replace the Battery in a Jeep Compass Remote Key?
How to Replace the Battery in a Jeep Compass Remote Key?
Jeep Compass (2016-2025 / 552, MK 2) To replace the battery in a Jeep Compass remote key, lower the switch located at the top of the remote so that the chrome part to which the emergency…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos