Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Key Fob Battery on the Jeep Compass

Model: Jeep Compass 552, MK 2 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Key

See other generations:
Video tutorial

In this video tutorial, you can see how easy it is to replace the battery in the key fob for the Jeep Compass. Note: if the Jeep remote is not working, it may be due to a flat battery, so proceed as follows: take the key and start removing the cover plastics to change the battery in the Jeep Compass key. Be careful when using the screwdriver to avoid damaging the plastics of the key and injuring yourself.

Take the Jeep key fob, slide the button to release the metal key. Hold the fob in one hand and use the other to insert the tool to pry at the side of the cover where the key sits. Pry until you detach the plastic cap covering the battery compartment.

At this point, you can replace the battery with a working one, then reassemble the pieces in reverse order.


Updated on 14 June 2026 by ScegliAuto


Related tutorials

How to Replace the Key Fob Battery on the Jeep Compass Mk1
How to Replace the Key Fob Battery on the Jeep Compass Mk1
Jeep Compass (2006-2016 / MK 49, MK 1) This guide shows how to replace the battery of the key fob on the Jeep Compass Mk1. The first step is to locate a small recess on the side of the fob…
How to Replace the Key Fob Battery on a Jeep Compass?
How to Replace the Key Fob Battery on a Jeep Compass?
Jeep Compass (2006-2016 / MK 49, MK 1) To replace the key fob battery on a Jeep Compass, loosen the screw located just below the key. By loosening this screw, you can open the fob and acce…
How to Replace the Key Fob Battery of the Jeep Compass?
How to Replace the Key Fob Battery of the Jeep Compass?
Jeep Compass (2006-2016 / MK 49, MK 1) To replace the key fob battery of the Jeep Compass, use a flathead screwdriver to lever inside the groove that forms between the two halves of the fo…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos