Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Cabin Filter on a Jeep Renegade

Model: Jeep Renegade MK 1, BU, 520 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Cabin air filter

Video tutorial

This guide shows how to remove the pollen filter on a Jeep Renegade. Open the glove compartment and unclip the end stop arms, then unscrew the securing screws with a screwdriver.

After completing the previous steps, unscrew the side screws in the glove compartment and pull the plastic door out. Unscrew the remaining screws and after disconnecting the power wires, pull the glove compartment cover off the dashboard. Then, remove the air filter from its housing as shown in the video.

Insert the new filter and reassemble all the components of the glove compartment as you disassembled them earlier.


Updated on 2 March 2026 by ScegliAuto


Related tutorials

Replace Cabin Filter on Jeep Renegade
Replace Cabin Filter on Jeep Renegade
Jeep Renegade (2014-2026 / MK 1, BU, 520) In this video guide, you will learn how to remove and replace the cabin filter of a Jeep Renegade. First, get in the vehicle from the passenger side …
How to Replace the Cabin Air Filter of the Jeep Renegade
How to Replace the Cabin Air Filter of the Jeep Renegade
Jeep Renegade (2014-2026 / MK 1, BU, 520) In this guide, you will find instructions to remove and replace the cabin air filter of the Jeep Renegade. First, open the front passenger door and s…
Replacement of the cabin air filter for the Jeep Renegade.
Replacement of the cabin air filter for the Jeep Renegade.
Jeep Renegade (2014-2026 / MK 1, BU, 520) In this guide, we will see the instructions that will allow us to replace the cabin air filter of the Jeep Renegade. First, let's get inside the cabi…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos