Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change Engine Oil on a Jeep Compass

Model: Jeep Compass MK 49, MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Engine oil

See other generations:
Video tutorial

Prepare to change the engine oil on a Jeep Compass. Follow these steps: lift the car on a column lift or jack, unscrew the oil sump bolt with a socket wrench (after removing the plastic protective panel, if available), allow the fluid to drain into a disposal container, and then re-tighten the sump bolt.

After draining the oil from the engine, lower the car and lift the bonnet; secure it. Refill with new oil and measure the oil level multiple times with the metal dipstick until you reach the ideal level.


Updated on 2 March 2026 by ScegliAuto


Related tutorials

How to Replace the Engine Oil and Oil Filter on the Jeep Compass 2.4 Multiair
How to Replace the Engine Oil and Oil Filter on the Jeep Compass 2.4 Multiair
Jeep Compass (2016-2025 / 552, MK 2) Today, learn how to drain and refill the engine oil on the Jeep Compass 2.4 Multiair, while also replacing the oil filter. First, raise the vehicle a…
Engine Oil Replacement on Jeep Compass
Engine Oil Replacement on Jeep Compass
Jeep Compass (2006-2016 / MK 49, MK 1) In this video, you can see how to replace the engine oil when the message to change the engine oil appears on your Jeep Compass. When this message ap…
How to Reset the Oil Warning Light on a 2021 Jeep Compass
Jeep Compass (2016-2025 / 552, MK 2) The manual reset of the engine oil warning light on the dashboard of your 2021 Jeep Compass is very straightforward. In this mini guide, you will dis…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos