Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the tire pressure light on the Jeep Compass?

Model: Jeep Compass 552, MK 2 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Tire pressure warning light

See other generations:
Video tutorial

In order to make the tire pressure warning light disappear from the instrument panel of the Jeep Compass, you will first need to adjust the tires to the correct inflation pressure: this value can be found on the sticker attached to the driver's side door pillar.

Once all the tires have been inflated to the correct pressure, you can turn on the instrument panel and check the value on the onboard computer; if the tire pressure warning light remains on even after inflating the tires, you will need to drive for a few kilometers to allow the sensors to work properly.


Posted on 7 July 2025 by ScegliAuto


Related tutorials

How to Reset the Tyre Pressure Warning Light on the Jeep Compass?
How to Reset the Tyre Pressure Warning Light on the Jeep Compass?
Jeep Compass (2006-2016 / MK 49, MK 1) When the tyre pressure warning light illuminates on the Jeep Compass display along with an audible signal, it means that at least one of the four tyr…
How to reset the tyre pressure warning light on a Jeep Compass?
How to reset the tyre pressure warning light on a Jeep Compass?
Jeep Compass (2016-2025 / 552, MK 2) To reset the tyre pressure warning light on the Jeep Compass, first ensure the tyres are inflated to the correct pressure. This value is found on the…
How do you reset the tire pressure warning light on the Jeep Compass?
How do you reset the tire pressure warning light on the Jeep Compass?
Jeep Compass (2006-2016 / MK 49, MK 1) On the instrument panel of the Jeep Compass, the tire pressure warning light can be reset by inflating the tires to the correct inflation pressure va…

Other guides you may be interested in

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos