|
Do it yourself
| |||
| ||||
How to Reset the Start & Stop System on the Jeep Compass MK1
Model: Jeep Compass
MK 1, MK 49
- Years 2006-2016
In this video, we will see how to reset the Start & Stop system on our Jeep Compass MK1: from the fuse box, we need to locate the fuse, which on this model is found in the box located in the cabin and should be number #F32, but it is best to check, as it may be located differently depending on the version. Remove it and wait for a minute. Be aware that removing this fuse may affect other systems connected to it, so it is advisable to consult the owner's manual. After a minute has passed, replace the fuse and restart the car, letting it run for a few minutes at idle, then take it for a test drive. This operation can also be done by disconnecting the negative terminal of the battery and takes about fifteen minutes to ensure the capacitors fully discharge. Unfortunately, this system requires re-entering the radio code, so keep it handy when reconnecting the battery, or the radio will not work.
Posted on 15 February 2026 by ScegliAuto
This video is currently unavailable
Related tutorials
Jeep Compass
(2006-2016 /
MK 1, MK 49)
To reset the Start&Stop system on the Jeep Compass, open the bonnet to access the battery located in the engine compartment. The Start&Stop system ac…
Jeep Compass
(2016-2025 /
552, MK 2)
In this short and simple guide, we will see how to reset the start&stop system of the Jeep Compass, following the instructions below. In order for th…
Jeep Compass
(2016-2025 /
552, MK 2)
Today we will discover the instructions that will allow us to enable and disable the Start&Stop system on the Jeep Compass, in simple steps. First, l…
Other guides you may be interested in
|
Frequently Asked QuestionsHow to Bleed the Clutch on a Renault Clio?
To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.201
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |