Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Fog Light Bulbs on a Jeep Renegade

Model: Jeep Renegade MK 1, BU, 520 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Fog lights

Video tutorial

Learn how to change the fog light bulbs on a Jeep Renegade. Begin by removing the plastic cover at the bottom of the bumper with a suitable screwdriver to access the side fog light located in the front bumper.

After removing the bulb holder, take out the damaged bulb and install a new LED bulb (same size and voltage). Refit the black plastic cover under the car's bumper with the attached clips.

Test the lights to ensure they are functioning correctly. Perform this replacement on the front lights to achieve the same type of illumination.


Updated on 11 March 2026 by ScegliAuto


Related tutorials

How to Change the Fog Light Bulbs on a Jeep Renegade
How to Change the Fog Light Bulbs on a Jeep Renegade
Jeep Renegade (2014-2026 / MK 1, BU, 520) How do you change the fog light bulbs on a Jeep Renegade? Prepare to open the cover located in the plastic wheel arch liner using a suitable screwdri…
Replacing the Fog Light on Jeep Renegade
Replacing the Fog Light on Jeep Renegade
Jeep Renegade (2014-2026 / MK 1, BU, 520) How to remove the fog light or bulb of the Jeep Renegade? Let’s see how to remove the cover plastics. Turn the front wheel and unscrew the securing s…
Replacing the Front Fog Light Bulbs on the Jeep Renegade
Replacing the Front Fog Light Bulbs on the Jeep Renegade
Jeep Renegade (2014-2026 / MK 1, BU, 520) Discover in this video the instructions on how to remove and replace the front fog light bulbs on the Jeep Renegade in simple steps. First, turn the …

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos