Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Wiper Blade on a Jeep Renegade?

Model: Jeep Renegade MK 1, BU, 520 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Windshield wipers

Video tutorial

To replace the front wiper blades on a Jeep Renegade, you only need two minutes and, of course, new blades. The video author recommends Bosch blades, known for their quality.

For safety, place a cloth between the wiper and the windscreen to protect it from scratches during the operation. Start by lifting the wiper arm on the driver's side and detach the blade.

Replace it with the new one, ensuring it is straight during insertion, then repeat the same operation on the other wiper arm.


Posted on 21 June 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Wiper on the Jeep Renegade?
How to Replace the Rear Wiper on the Jeep Renegade?
Jeep Renegade (2014-2026 / MK 1, BU, 520) To replace the rear wiper on the Jeep Renegade, detach the blade from the windscreen, which will also partially lift the arm that controls its moveme…
How to Replace the Rear Wiper Blade on a Jeep Renegade?
How to Replace the Rear Wiper Blade on a Jeep Renegade?
Jeep Renegade (2014-2026 / MK 1, BU, 520) Replacing the rear wiper blade on the Jeep Renegade is a very simple and quick operation. First, you will need a 25 cm replacement blade, easily avai…
How to Check the Oil Level on a Jeep Renegade?
How to Check the Oil Level on a Jeep Renegade?
Jeep Renegade (2014-2026 / MK 1, BU, 520) To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the …

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos