Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Rear Wiper on the Jeep Renegade?

Model: Jeep Renegade 520, MK 1, BU - Years 2014-2026
Part: Windshield wipers

To replace the rear wiper on the Jeep Renegade, detach the blade from the windscreen, which will also partially lift the arm that controls its movement. Once the blade is detached, tilt it away from the arm to free it from the hook that connects them. At this point, completely remove the old blade and position the new one: it should be attached to its arm and brought back into contact with the windscreen, ensuring everything functions correctly.

Updated on 15 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Jeep Renegade (2014-2026 / 520, MK 1, BU) To replace the rear wiper on a Jeep Renegade, lift the wiper arm from the rear window until it is in the working position. Locate the wiper blade fas…
Jeep Renegade (2014-2026 / 520, MK 1, BU) Today we will explain how to replace the front and rear windshield wiper blades of the Jeep Renegade. To perform this operation, we need to lift the …
Jeep Renegade (2014-2026 / 520, MK 1, BU) To replace the front wiper blades on a Jeep Renegade, you only need two minutes and, of course, new blades. The video author recommends Bosch blades,…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos