Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Wiper Blade on a Jeep Renegade?

Model: Jeep Renegade 520, MK 1, BU - Years 2014-2026
Part: Windshield wipers

Replacing the rear wiper blade on the Jeep Renegade is a very simple and quick operation. First, you will need a 25 cm replacement blade, easily available at car parts shops and major online retailers for under £10. The replacement procedure is very straightforward, as shown in the attached tutorial. Grip the blade near the joint, pull it, and separate it from the arm, as clearly demonstrated in the video. Fitting the replacement will be just as easy; simply insert the blade's pin into the hook and press to secure it.

Updated on 27 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Wiper on the Jeep Renegade?
How to Replace the Rear Wiper on the Jeep Renegade?
Jeep Renegade (2014-2026 / 520, MK 1, BU) To replace the rear wiper on the Jeep Renegade, detach the blade from the windscreen, which will also partially lift the arm that controls its moveme…
How to Change the Wiper Blade on a Jeep Renegade?
How to Change the Wiper Blade on a Jeep Renegade?
Jeep Renegade (2014-2026 / 520, MK 1, BU) To replace the front wiper blades on a Jeep Renegade, you only need two minutes and, of course, new blades. The video author recommends Bosch blades,…
How to Replace the Rear Light Bulbs on a Jeep Renegade
How to Replace the Rear Light Bulbs on a Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) Are the rear lights on your car not working anymore? Follow this guide to remove the light unit from a Jeep Renegade and replace the bulbs. Open the …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos