Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the TPMS Light on a Jeep Renegade

Model: Jeep Renegade MK 1, BU, 520 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Service warning light

Video tutorial

To reset the TPMS light on a Jeep Renegade, first adjust the pressure of all tyres according to the manufacturer's specifications. Next, turn on the instrument cluster without starting the engine and use the controls on the left side of the steering wheel to access the display menu.

Select the section dedicated to vehicle information, then the option related to the TPMS or tyre pressure. At this point, press and hold the OK button until the message confirming the system reset appears.

Once the procedure is complete, simply turn off and turn on the instrument cluster to check that the light has turned off.


Posted on 13 July 2026 by ScegliAuto


Related tutorials

TPMS: How to Reset the Tyre Pressure Sensor on the Jeep Renegade
TPMS: How to Reset the Tyre Pressure Sensor on the Jeep Renegade
Jeep Renegade (2014-2024 / ) On the Jeep Renegade, resetting the TPMS is done after adjusting the pressures according to the chart on the door pillar. With the Jeep Renegade stat…
How to Reset the TPMS Light on a Jeep Renegade
How to Reset the TPMS Light on a Jeep Renegade
Jeep Renegade (2014-2026 / MK 1, BU, 520) To reset the TPMS light on a Jeep Renegade, first ensure that the pressure of all tyres is correct according to the manufacturer's specifications. Tu…
How to Reset the TPMS Light on the Jeep Renegade
How to Reset the TPMS Light on the Jeep Renegade
Jeep Renegade (2014-2026 / MK 1, BU, 520) If you notice the TPMS light on the instrument cluster of your Jeep Renegade stays on when you start the vehicle, despite no puncture being present, …

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos