Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Engine Air Filter on a Jeep Renegade

Model: Jeep Renegade 520, MK 1, BU - Years 2014-2026
Part: Air filter

To remove the engine air filter on a Jeep Renegade, open the car door, pull up the engine compartment release lever located at the bottom left of the dashboard, and lift the bonnet, securing it with the prop rod. Remove the engine soundproofing panel, then open the air kit (unscrew the securing screws), uncover the filter box cap, and extract the worn air filter. Insert a new filter into the designated housing (ensuring it fits well around the edges). Finally, reassemble the cap over the air box and tighten the screws. Close the bonnet at the end of the maintenance.

Updated on 12 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Air Filter from a Jeep Renegade
How to Remove the Air Filter from a Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) Let’s see how to remove and replace the engine air filter on a Jeep Renegade. Open the car door, pull up the bonnet release lever located at the bott…
How to Remove the Air Vents on a Jeep Renegade
How to Remove the Air Vents on a Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) Follow these steps to remove the air vents (side dashboard) on a Jeep Renegade. Use multiple levers (if necessary) to remove the vents. Pry at the to…
How to Remove the Front Indicator on a Jeep Renegade
How to Remove the Front Indicator on a Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) Before you can start, open the bonnet of your Jeep Renegade. Begin by releasing the internal clips that secure the front indicator to the vehicle, us…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos