Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Car Radio on Jeep Renegade

Model: Jeep Renegade 520, MK 1, BU - Years 2014-2026
Part: Car stereo

Removing the car radio on a Jeep Renegade is a straightforward task that can be done without professional help with a bit of skill. First, remove the frame surrounding the radio; this will be secured with clips and can be pried off using a lever between the frame and the dashboard. To avoid scratching surfaces, use plastic levers or protect any makeshift tools with tape. Once the frame is removed, you will have access to four screws located at the corners of the radio; simply remove these to extract the radio from the dashboard. After extracting the radio, disconnect the lever connector and various plugs to remove it completely from the car.

Updated on 15 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove and Replace the Radio in a Jeep Renegade
How to Remove and Replace the Radio in a Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) Follow these instructions to remove and replace the standard radio in a Jeep Renegade. First, get inside the vehicle and start by removing the plasti…
How to Replace the Radio in a Jeep Renegade
How to Replace the Radio in a Jeep Renegade
Jeep Renegade (2014-2021 / ) In this video, you will learn how to remove the original radio from the Jeep Renegade and replace it with a new Android touch screen radio to moderni…
How to Replace the Radio in a Jeep Renegade?
How to Replace the Radio in a Jeep Renegade?
Jeep Renegade (2014-2026 / 520, MK 1, BU) To replace the radio in a Jeep Renegade, use a flat object like a screwdriver to pry off the plastic trim surrounding the radio display. Once the tri…

    Frequently Asked Questions

    • Jeep Renegade 2014-2026 - My Jeep Renegade screen does not turn on, what can it be? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos