Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Jeep
    3. :
  3. Cherokee
    4. : How to disassemble the radiator of the Jeep Cherokee

Jeep Cherokee - Video tutorial

Model: Jeep Cherokee XJ, MK 2 - Years 1984-2001
Part: Radiator
Operation: How to disassemble the radiator of the Jeep Cherokee

Is the radiator leaking? Let's see how to disassemble it on a Jeep Cherokee. We open the bonnet, remove the soundproofing panel of the engine. With a suitable socket wrench we go to disassemble the plates that block the radiator in the upper part, we loosen the clamp of the water hose. We detach the various convoy sleeves of the refrigeration system with pliers. We unscrew and extract the fan kit. Immediately after the radiator from the engine compartment. Let's get ready to mount the new piece in the engine compartment, mount the cooling fans, clamps, pins and various pipes. We reassemble the anchoring brackets of the radiator with attached plates. We tighten the plastics well with a socket wrench.


Posted on 2 December 2023 by ScegliAuto



Jeep Cherokee radiator replacement
Jeep Cherokee (1984-2001 / XJ, MK 2) Let's see in this guide the procedure required to disassemble and replace the Jeep Cherokee's cooling radiator. First of all we lift the car and begi
Jeep Cherokee heating radiator replacement
Jeep Cherokee (1984-2001 / XJ, MK 2) Is the heating radiator damaged? Let's see how to proceed with the disassembly on the Jeep Cherokee. We remove the plastics of the lining of the cent
How to disassemble the heating radiator on the Jeep Cherokee XJ?
Jeep Cherokee (1984-2001 / XJ, MK 2) We follow the instructions in the video to learn how to remove the heating radiator in the Jeep Cherokee. First, we need to remove various plastic pa

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos