Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Jeep
    3. :
  3. Cherokee
    4. : How to disassemble the heating radiator on the Jeep Cherokee XJ?

Jeep Cherokee - Video tutorial

Model: Jeep Cherokee XJ, MK 2 - Years 1984-2001
Part: Passenger compartment heating radiator
Operation: How to disassemble the heating radiator on the Jeep Cherokee XJ?

We follow the instructions in the video to learn how to remove the heating radiator in the Jeep Cherokee. First, we need to remove various plastic parts of the dashboard. To make our work easier, we can remove both the front seats and the center console: this way we will have more space to move around and work comfortably. After removing the dashboard, we do the same with all the elements listed in the video: cigarette lighter, radio, clock, etc. Remembering to also disconnect the electrical connectors. We unscrew all the fixing nuts and remove the heater box, open its cover, and proceed with the replacement of the radiator.


Posted on 13 September 2023 by ScegliAuto



Jeep Cherokee heating radiator replacement
Jeep Cherokee (1984-2001 / XJ, MK 2) Is the heating radiator damaged? Let's see how to proceed with the disassembly on the Jeep Cherokee. We remove the plastics of the lining of the cent
Interior heating radiator replacement
Jeep Cherokee (2002-2007 / MK 3, KJ) Replacing the heating radiator is a fairly simple maintenance operation to perform. The heating radiator is located on the passenger side, so it can
How to disassemble the radiator of the Jeep Cherokee
Jeep Cherokee (1984-2001 / XJ, MK 2) Is the radiator leaking? Let's see how to disassemble it on a Jeep Cherokee. We open the bonnet, remove the soundproofing panel of the engine. With a

Other guides that may interest you

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos