Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the Cabin Heater Radiator

Model: Jeep Cherokee KJ, MK 3 - Years 2002-2007
Part: Heater core

The operation of replacing the heater radiator is a relatively simple maintenance task. The heater radiator is located on the passenger side, so you can only access it by removing the glove compartment, which can be easily extracted by unscrewing the two screws present. Carry out the operation with caution. Use a spanner to remove the cover that secures the protection to the radiator pipes. You can then proceed to extract the radiator from its housing and install the new one, first cleaning the area where it will reside.

Updated on 15 February 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Replacing the Heating Radiator on a Jeep Cherokee
Replacing the Heating Radiator on a Jeep Cherokee
Jeep Cherokee (1984-2001 / XJ, MK 2) Is the heating radiator damaged? Let's see how to proceed with the removal on a Jeep Cherokee. Remove the plastic covers from the centre tunnel and u…
How to Remove the Heater Radiator on a Jeep Cherokee XJ
How to Remove the Heater Radiator on a Jeep Cherokee XJ
Jeep Cherokee (1984-2001 / XJ, MK 2) Follow the instructions in the video to learn how to remove the heater radiator in a Jeep Cherokee. First, remove the various plastics from the dashb…
Replacing the Radiator of the Jeep Cherokee
Replacing the Radiator of the Jeep Cherokee
Jeep Cherokee (1984-2001 / XJ, MK 2) This guide covers the procedure to remove and replace the cooling radiator of the Jeep Cherokee. First, lift the vehicle and begin disconnecting the …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos