Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Lift a Jeep Compass with a Jack

Model: Jeep Compass MK 1, MK 49 - Years 2006-2016

Learn how to lift a vehicle that may seem complicated for maintenance: the Jeep Compass. First, know that the jack must be placed only in specific areas and not on the bodywork (this can be very dangerous and cause significant damage). Position the jack only on the metal bar located at the bottom of the vehicle, about 8-10 inches from the wheel in question: also ensure that the support base is flat. Start lifting the vehicle and proceed with the necessary maintenance.

Updated on 17 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Spare Wheel from the Boot of the Jeep Compass
How to Remove the Spare Wheel from the Boot of the Jeep Compass
Jeep Compass (2016-2025 / 552, MK 2) In this video, find the spare wheel of the Jeep Compass: open the boot, lift the access cover using the load floor handle, then remove the fastening …
Changing Tyres on Jeep Compass
Changing Tyres on Jeep Compass
Jeep Compass (2006-2016 / MK 1, MK 49) Open the boot and remove the lower cover, as shown in the video. Underneath, you will find a jack: unscrew the fastener and take it out. Removing and…
How to Change Engine Oil on a Jeep Compass
How to Change Engine Oil on a Jeep Compass
Jeep Compass (2006-2016 / MK 1, MK 49) Prepare to change the engine oil on a Jeep Compass. Follow these steps: lift the car on a column lift or jack, unscrew the oil sump bolt with a socke…

Other guides you may be interested in

    Frequently Asked Questions

    • Compass 2016-2025 - Why is the Stop and Start service not available on the Jeep Compass? Read answer

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos