Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Key Battery of a Jeep Grand Cherokee

Model: Jeep Cherokee KL, MK 5 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Key

See other generations:
Video tutorial

Start by removing the internal emergency key by pressing the button located at the top of the electronic key. Once you have removed the emergency key, proceed to open the electronic key in two parts using a small flathead screwdriver and prying it apart.

This will give you access to the exhausted battery, which you can simply pull out to complete the disassembly.

At this point, to install the new battery and close the electronic key, simply follow these instructions in reverse, and you will have completed the replacement.


Updated on 1 April 2026 by ScegliAuto


Related tutorials

Where is the battery located in the Jeep Grand Cherokee?
Where is the battery located in the Jeep Grand Cherokee?
Jeep Cherokee (2013-2023 / KL, MK 5) The Jeep Grand Cherokee, unlike other models in the same category, has the battery located in a different position. Specifically, the battery of the …
Replacing the Remote Battery on Jeep Cherokee - Grand Cherokee
Replacing the Remote Battery on Jeep Cherokee - Grand Cherokee
Jeep Cherokee (2013-2023 / KL, MK 5) In this video, learn how to disassemble and replace the battery of the electronic key remote on a Jeep Cherokee and Grand Cherokee. First, take your …
How to Replace the Battery of the Jeep Grand Cherokee
How to Replace the Battery of the Jeep Grand Cherokee
Jeep Cherokee (2008-2012 / MK 4, KK) Unlike many other car models, even those in the same category, in the 2012 Jeep Grand Cherokee, the battery is not located under the bonnet but benea…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos