Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Roof on a Jeep Wrangler

Model: Jeep Wrangler JK, MK 3 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018

See other generations:
Video tutorial

In this video tutorial, you will see the main instructions for removing the roof on a second-generation Jeep Wrangler. First, access the interior of the cabin and unscrew the two knobs located next to the light fixture; then lower the sun visors and open all the handles found on the roof, as shown in the video.

At this point, lift the first panel to remove it; unscrew the securing screws of the pillars to remove the rear section. Follow the video to the end to fully understand the removal procedure!


Updated on 4 April 2026 by ScegliAuto


Related tutorials

Removing the Roof of a Jeep Wrangler
Removing the Roof of a Jeep Wrangler
Jeep Wrangler (2007-2018 / JK, MK 3) Today, you will learn how to remove the upper part of the roof from a Jeep Wrangler. First, remove the parts at the top, at the height of the front s…
Removing the Removable Roof of the Jeep Wrangler
Removing the Removable Roof of the Jeep Wrangler
Jeep Wrangler (2007-2018 / JK, MK 3) In this brief and simple guide, learn how to remove the removable roof of the Jeep Wrangler, following the instructions below. First, open the front …
How to Remove the Hardtop from the Jeep Wrangler
How to Remove the Hardtop from the Jeep Wrangler
Jeep Wrangler (2007-2018 / JK, MK 3) Today, learn the steps to remove the hardtop from the 2018 Jeep Wrangler. The first step is to open the left door to access the inside of the vehicle…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos