Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Bulb from a Jeep Grand Cherokee

Model: Jeep Grand Cherokee WK2, MK 4 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Headlight bulb

See other generations:
Video tutorial

Before you begin, turn the front wheels of your Jeep Renegade to the right. Start by removing the cover in the front wheel arch.

Then, rotate counter-clockwise and pull out the entire bulb holder from the front lamp. This will give you access to the blown bulb.

At this point, disconnect the bulb from its electrical connector. Once you complete this step, you will have finished removing the front lamp bulb from your Jeep Renegade, and you can install the new bulb.


Updated on 5 April 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlamp Bulb on a Jeep Grand Cherokee?
How to Replace the Front Headlamp Bulb on a Jeep Grand Cherokee?
Jeep Grand Cherokee (2004-2010 / WH, WK, MK 3) To replace the front headlamp bulb on a Jeep Grand Cherokee, open the bonnet to access the rear of the headlamp corresponding to the bulb that needs …
Replacing the Front Headlamp Bulb on the Jeep Grand Cherokee
Replacing the Front Headlamp Bulb on the Jeep Grand Cherokee
Jeep Grand Cherokee (2010-2021 / WK2, MK 4) In this video, learn how to dismantle and replace the front headlamp bulb on the Jeep Grand Cherokee by following these simple and quick steps. First…
Replacing the Front Headlamp Bulb of the Jeep Grand Cherokee
Replacing the Front Headlamp Bulb of the Jeep Grand Cherokee
Jeep Grand Cherokee (2010-2021 / WK2, MK 4) Today, we will see through these brief instructions how to remove and replace the front headlamp bulb of the Jeep Grand Cherokee. First, open the bon…

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos