Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Cabin Heater Fan on a Jeep Grand Cherokee

Model: Jeep Grand Cherokee WK2, MK 4 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Blower motor

See other generations:
Video tutorial

In this video tutorial, you will see instructions on how to remove and replace the cabin heater fan on a 2012 Jeep Grand Cherokee. First, access the passenger side and remove the panel under the glove compartment by removing the retaining clips; then access the fan and motor.

To remove it, unscrew the retaining screws and disconnect the electrical connector: then extract the fan and replace it with the new one, applying the reverse procedure for reassembly!


Updated on 20 April 2026 by ScegliAuto


Related tutorials

Removing the Glove Box from a Jeep Grand Cherokee
Removing the Glove Box from a Jeep Grand Cherokee
Jeep Grand Cherokee (2004-2010 / WH, WK, MK 3) This guide shows you how to remove and replace the glove box of the Jeep Grand Cherokee, following the instructions below. First, get inside the vehi…
Where are the Fuses on a Jeep Grand Cherokee?
Jeep Grand Cherokee (1998-2004 / MK 2, WJ) The fuses on the Jeep Grand Cherokee are located within specific fuse boxes installed in the vehicle: this car model has two. The first is located in…
Replacing the Heating Radiator on Jeep Grand Cherokee
Replacing the Heating Radiator on Jeep Grand Cherokee
Jeep Grand Cherokee (1998-2004 / MK 2, WJ) Let’s see how to remove the cooling radiator on a Jeep Grand Cherokee. Open the bonnet, and using a suitable socket wrench, remove the screws securin…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos