Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Headlights on a 1990 Jeep Cherokee XJ

Model: Jeep Cherokee XJ, MK 2 - Years 1984-2001
Part: Headlight

In today's video, you will see how to remove and replace the front headlights on a 1990 Jeep Cherokee XJ, first series, by following these simple and quick steps. To remove the headlights, first remove the plastic front grille found on the side of the headlight by prying it off; then unscrew all the securing screws located underneath to detach the headlight, as illustrated in the video. At this point, disconnect the electrical connector found at the back to remove it completely, and then replace it with the new one!

Updated on 20 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Bumper from a Jeep Cherokee
How to Remove the Front Bumper from a Jeep Cherokee
Jeep Cherokee (1984-2001 / XJ, MK 2) To remove the front bumper from a Jeep Cherokee, access the inside of the bumper to disconnect the underlying connectors. Once these are disconnected…
How to Replace the Headlight Bulbs on the Jeep Cherokee Mk5
How to Replace the Headlight Bulbs on the Jeep Cherokee Mk5
Jeep Cherokee (2013-2023 / KL, MK 5) This guide shows how to replace the headlight bulbs on the Jeep Cherokee Mk5. First, ensure the vehicle is secure and turn the steering wheel in the …
How to Replace the Front Headlight Bulbs on a Jeep Cherokee?
How to Replace the Front Headlight Bulbs on a Jeep Cherokee?
Jeep Cherokee (1984-2001 / XJ, MK 2) In the attached video tutorial, you can see how to replace the front headlight bulbs on a Jeep Cherokee XJ. This is a very simple operation, and you …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos