Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembly of the Window Regulator Motor on Jeep Renegade

Model: Jeep Renegade 520, MK 1, BU - Years 2014-2026
Part: Power window motor

Before reaching the window regulator motor, you must first remove the door panel. To do this, remove the small cover behind the opening handle and unscrew the screw underneath. Then remove the plastic with the window switch buttons and unscrew the other two bolts (first disconnect the connector of the buttons). Finally, unscrew all the bolts located underneath and to the side of the door, as clearly shown in the video, and then detach the panel from the door itself, working carefully. At this point, you can follow the disassembly procedure in the video to remove the window regulator motor.

Updated on 21 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Side Indicator on a Jeep Renegade
Removing the Side Indicator on a Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) In this video tutorial, learn how to remove the side indicator on a Jeep Renegade: a simple and quick process that requires no special tools. First, …
Removing the rear light on Jeep Renegade
Removing the rear light on Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) In today's video, we will see how to remove the rear light on a Jeep Renegade, in simple steps. First, open the boot and remove the side plastic cove…
How to Remove the Rear Door Panel on a Jeep Renegade
How to Remove the Rear Door Panel on a Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) To remove the rear panel of the Jeep Renegade, you will need plastic trim tools to avoid damaging the coverings. First, remove the plastic cover over…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos