Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Tailgate Struts on the Jeep Patriot - Renegade

Model: Jeep Patriot MK 1 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Hydraulic pistons

Video tutorial

In this tutorial video, you will learn how to remove and replace the tailgate struts on the Jeep Patriot, as well as on the Renegade, in simple and quick steps. First, open the tailgate and start by removing the old struts; use something thin like a flat screwdriver to release the struts by levering, as shown in the video.

At this point, detach them from the base to remove them completely; simply fit the new strut of the correct type, and repeat the same operation on the other side!


Updated on 21 April 2026 by ScegliAuto


Related tutorials

How to Remove the Rear Bumper on a Jeep Patriot
How to Remove the Rear Bumper on a Jeep Patriot
Jeep Patriot (2007-2017 / MK 1) This brief and simple guide outlines the procedure necessary to remove and replace the rear bumper on a Jeep Patriot. First, open the tailgate and st…
How to Open the Bonnet of the Jeep Patriot
How to Open the Bonnet of the Jeep Patriot
Jeep Patriot (2007-2017 / MK 1) Today, you will see the instructions to open the bonnet of the Jeep Patriot. First, open the driver's side front door and pull the bonnet release lev…
Replacing the Number Plate Light on a Jeep Patriot
Replacing the Number Plate Light on a Jeep Patriot
Jeep Patriot (2007-2017 / MK 1) Want to replace the number plate bulbs? Here's how to remove the number plate bulbs on the Patriot. Open the boot lid, and using a screwdriver, detac…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos