Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Open the Bonnet of the Jeep Patriot

Model: Jeep Patriot MK 1 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Checks and maintenance

Video tutorial

Today, you will see the instructions to open the bonnet of the Jeep Patriot. First, open the driver's side front door and pull the bonnet release lever located at the bottom left (next to the pedals); then, release the lever located at the front, between the bonnet and the front bumper grille, as shown in the video.

At this point, lift the bonnet, supported by the hydraulic struts or by securing the prop rod; finally, lower the bonnet, guiding it to close properly.


Posted on 3 June 2026 by ScegliAuto


Related tutorials

Where is the fuse box located in the Jeep Patriot?
Where is the fuse box located in the Jeep Patriot?
Jeep Patriot (2007-2017 / MK 1) If you don't know where the box containing the fuses of your Jeep Patriot is located, don't worry because below you will find the steps to follow to …
How to Change the Engine Oil of a Jeep Patriot
How to Change the Engine Oil of a Jeep Patriot
Jeep Patriot (2007-2017 / MK 1) To change the engine oil of the Jeep Patriot, loosen the drain plug located at the bottom of the vehicle: once this plug is loosened, you can let all…
How to open the fuel cap of the Jeep Patriot
How to open the fuel cap of the Jeep Patriot
Jeep Patriot (2007-2017 / MK 1) Today we will explain how to open the fuel cap of the Jeep Patriot. To open the fuel cap, we need to turn off the vehicle and press on the tank door …

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos